Clips for Bullet Pixels

  This is a square pixel mount for 12mm bullet pixels. The mounting holes are 4mm in diameter and the thickness of the base is 8mm. The base is 30mm x 30mm square and a total of 15mm tall. If you have access to a 3D printer, you can download any of...

  This is a BPTC (Bullet Pixel Tree Clip) that will securely hold a 12mm Bullet pixel parallel to a tree base or branch for Christmas Lights. There are three sizes available that have a different radius to help hug the portion of the tree you are...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel parallel to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT pipe and 1/4" round bar. There is also a locking pin...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel perpendicular to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT pipe. There is a locking pin option that will...

This is a pixel spacer block that will align a 12mm Bullet pixel parallel to a PVC or EMT pipe and then can be zip tied to the pipe for Christmas Lights. This was designed for 1/2", 3/4" schedule 40 PVC and EMT pipe. There are two versions available. One...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm bullet pixel that can be mounted to a either 3/16" and 1/4" round bar, 1/2" & 3/4" schedule 40 PVC & EMT pipe. There is also a locking pin option that will help keep the clip centered...