For Permanent Mounting STL Files

This is our beam mount clip. This is available for 1/2" EMT pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4 inches in length. Try Before You Buy: This option is for...

This is our beam mount clip. This is available for 1/2" PEX pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4 inches in length. Try Before You Buy: This option is for...

This is our beam mount clip. This is available for 1/2" PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4 inches in length. Try Before You Buy: This option is for...

This is our beam mount clip. This is available for 20mm PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4 inches in length. Try Before You Buy: This option is for...

This is our beam mount clip. This is available for 25mm PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4 inches in length. Try Before You Buy: This option is for...

This is our beam mount clip. This is available for 3/4" EMT pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4 inches in length. Try Before You Buy: This option is for...

This is our beam mount clip. This is available for 3/4" PEX pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4 inches in length. Try Before You Buy: This option is for...

This is our beam mount clip. This is available for 3/4" PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4 inches in length. Try Before You Buy: This option is for...

This is a square pixel mount for 12mm bullet pixels. The mounting holes are 4mm in diameter and the thickness of the base is 8mm. The base is 30mm x 30mm square and a total of 15mm tall. Try Before You Buy: This option is for those of you that are not...

This is a 3D printed pipe clip that mounts to a surface with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip. These are available in lengths of 2", 3", 4", 5" & 6"...

This is a 3D printed pipe clip that mounts to a surface with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip. These are available in lengths of 2", 3", 4", 5" & 6"...

This is a 3D printed pipe clip that mounts to a surface with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip. These are available in lengths of 2", 3", 4", 5" & 6"...