SFL Designs

This is the STL file for our 8" Seed Pixel Topper mounting base for 3/4" schedule 40 PVC. This mounting base can be bolted a 3/4" PVC using a stainless steel 1/4"-20 bolt that is 2.25" in length. The...

This is the STL file for our 8" Seed Pixel Topper that holds up to 64 strings. This thick topper plate can accommodate a pipe up to 2.5" in diameter with multiple mounting bases available for...

This is our beam mount clip. This is available for 1/2" EMT pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 1/2" PEX pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 1/2" PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 20mm PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 25mm PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 3/4" EMT pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 3/4" PEX pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 3/4" PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is a vertical mounting bracket for dual power supplies. These new brackets were designed for the MEAN WELL LRS-350-5/ LRS-350-12 / LRS-350-24 power supplies only. Our vertical power supply...

These are our GlideGuide Roller Wheels that were designed to work with the GlideGuide mega tree bearing blocks. These should be printed with a hardened TPU, like TPU 95 or higher. There are two...