SFL Designs

  No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure...

This is a flush mount pipe clip. This is available for 1/2" & 3/4" PVC and EMT pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm...

This is 90* corner used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe. These corners are printed with PETG which is UV resistant and are intended to last for many years to...

This is an coupler used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe. These couplers are printed with PETG which is UV resistant and are intended to last for many years...

  This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it a magnetic surface. They will space the PixelPipe far enough away from the mounting...

The Inline Pipe Coupler is designed to create a clean, rigid, straight‑through connection between two pipes. Whether you’re building frames for coro props, structural supports, or custom...

This is a 3D printed clip to attach pipe to J-Channel. This is available for 1/2" & 3/4" PVC and EMT pipe. These are available in lengths of 2", 2.5" & 3" and the length is measured from the...

The SFL J-Channel Drilling Jig is a follow up to our popular SFL PVC Drilling Jig. This new J-Channel jig is meant to make the drilling process faster, easier and more accurate than any other designs...

This is a base/wall mount for a Kulp K32A-B. This mount was designed to hold the K32A-B with the Beaglebone Black, but can be used to hold just the K32A-B as well. The mounting posts were designed to...

This is a 3D printed pipe clip that mounts to a surface with a 1.25" magnet that is to be screwed into the base. These are available in lengths of 1", 1.5" 2", 2.5" & 3". The length is from the...

A magnetic coro mount designed for fast, tool‑free installation of coro props on metal surfaces. This mount uses a countersunk neodymium magnet to create a strong, reliable attachment point while...

Mattos Designs Sasquatch GlideGuide – The Mega Tree Game‑Changer Stop fighting your mega tree. Start gliding it. The Sasquatch GlideGuide by SFL Designs is built to eliminate binding, wobble,...