SFL Designs

The SFL Drilling Jig is unlike any other jig. This jig is meant to make the drilling process faster, easier and more accurate than any other design. When used properly, a 10' section of pipe can be...

This is a Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount.   Try Before You...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...

This is a flush mount pipe clip. This is available for 20mm PVC pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in...

This is a Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount.   Try Before You...

This is our Mini Me Seed Pixel Tree Topper that is 4" in diameter and holds up to 32 strings. This thick, durable topper can accommodate several different EMT and PVC pipe sizes. Our unique design...

This is the STL file for our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back...

The Inline Pipe Coupler is designed to create a clean, rigid, straight‑through connection between two pipes. Whether you’re building frames for coro props, structural supports, or custom display...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel parallel to a pipe for Christmas Lights. This was designed for 20mm schedule 40 PVC pipe. There is also a locking pin...

This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel perpendicular to a pipe for Christmas Lights. This was designed for 20mm schedule 40 PVC pipe. There is a locking pin...

This is a shingle clip designed to hold 20mm PVC in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard...