SFL Designs

This is a 3D printed pipe clip to hold 20mm PVC pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if this clip...

This is a gutter clip designed to hold 20mm schedule 40 PVC. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a...

This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. Try Before You...

This is a SPPC (Square Pixel Pipe Clip) that will securely hold a 12mm Square pixel to a pipe for Christmas Lights. This was designed for 20mm schedule 40 PVC pipe. There is a locking pin option that...

This is a 3D printed gutter clip designed to hold 20mm schedule 40 PVC pipe. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy...

This is a Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount.   Try Before You...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...

This is a flush mount pipe clip. This is available for 25mm PVC pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in...

This is a Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount.   Try Before You...

This is our Mini Me Seed Pixel Tree Topper that is 4" in diameter and holds up to 32 strings. This thick, durable topper can accommodate several different EMT and PVC pipe sizes. Our unique design...

This is the STL file for our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back...

The Inline Pipe Coupler is designed to create a clean, rigid, straight‑through connection between two pipes. Whether you’re building frames for coro props, structural supports, or custom display...