SFL Designs

This is our beam mount clip. This is available for 1/2" PEX pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 1/2" PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 20mm PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 25mm PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 3/4" EMT pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 3/4" PEX pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 3/4" PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is a square pixel mount for 12mm bullet pixels. The mounting holes are 4mm in diameter and the thickness of the base is 8mm. The base is 30mm x 30mm square and a total of 15mm tall. Try Before...

This is a BPTC (Bullet Pixel Tree Clip) that will securely hold a 12mm Bullet pixel parallel to a tree base or branch for Christmas Lights. There are three sizes available that have a different...

This is an angled bracket used with the Bullet Track Mounting system. Each bracket gives your Bullet Track mounting system a professional finish. These angles have a specially designed retention hole...

This is an end cap used with the Bullet Track system. Each end cap gives your Bullet Track system a professional finish. There are three variations available for these end caps, a blank end cap, an...

This is an middle joiner used with the Bullet Track Mounting system. Each joining piece gives your Bullet Track mounting system a professional finish.   These end caps were designed to work with the...