SFL Designs

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel perpendicular to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4"...

These are multi-colored Pigtail Numbering Clips that help mark your pigtails from your controller or props. These are sold in different kits and in several different colors. They are printed in PETG...

These are multi-colored Pigtail Wire Label Clips that help mark your pigtails from your controller or props. These are sold in different kits and in several different colors. They are printed in...

These are EMT to PVC and PVC to PVC bushing. This bushing was designed to work with the Lasco Schedule 40 fittings. Please note that the 1/2" bushing was designed to fit into a 1/2" Schedule 40...

This is a PVC pipe clip to mount to your Coro prop for creating a frame for your Coro prop. Each group of clips can reliably support up to 35lbs of weight as shown in the image. When using EMT, they...

This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it to another pipe to be used as a standoff. They will space the PixelPipe far enough away from...

This is a pipe to vinyl siding pixel bracket to mount PVC or EMT to your vinyl siding. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments...

Pixel Paradise Snow Leopard GlideGuide – The Mega Tree Game‑Changer Stop fighting your mega tree. Start gliding it. The Pixel Paradise Snow Leopard GlideGuide by SFL Designs, was inspired by...

This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC and EMT. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is best to...

This is a pixel spacer block that will align a 12mm Bullet pixel parallel to a PVC or EMT pipe and then can be zip tied to the pipe for Christmas Lights. This was designed for 1/2", 3/4" schedule...

This is a 3D printed Pixel Pipe Stake. This was designed to hold the Boscoyo and HolidayCoro pixel strips. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is...

This pixel strip jig was designed to work with the standard 1mm thick pixel strip as well as the heavy duty 1.5mm pixel strip. There are four mounting holes to secure the jig to a table top. The...