SFL Designs

  These are our P5 Panel joiners for outdoor panels. Be sure you select the correct version as the mounting holes are not the same. One easy way to tell is the number of bolt holes on each panel...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel parallel to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT pipe...

This is a PBC (Pixa Bulb Clip) that will securely hold a Pixa Bulb C7 or C9 pixel that can then be mounted to 1/2" or 3/4" PVC or EMT pipe. There is also a locking pin option that will help keep the...

  This is an angled bracket used with the Permatrack Pixel Mounting system. Each bracket gives your Permatrack mounting system a professional finish. These components are printed with PETG which is...

  This is an end cap used with the Permatrack Pixel Mounting system. Each end cap gives your Permatrack mounting system a professional finish. These end caps are printed with PETG which is UV...

  This is an inside corner bracket used with the Permatrack Pixel Mounting system. Each bracket gives your Permatrack mounting system a professional finish. These components are printed with PETG...

  This is an middle joiner used with the Permatrack Pixel Mounting system. Each joining piece gives your Permatrack mounting system a professional finish. These joiners are printed with PETG which is...

This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed...

This is our perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. These are printed in UV resistant PETG material and if you are concerned with heat in you...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel perpendicular to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT...

This is a 3D printed shingle clip designed to hold 1/2", 3/4" PVC or EMT in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and...

These are multi-colored Pigtail Numbering Clips that help mark your pigtails from your controller or props. These are sold in different kits and in several different colors. They are printed in PETG...