SFL Designs

These are our Pixel Mounting Trim joiners for the Pixel Mounting Trim that's available from Your Pixel Store. Each joiner slides into the end of an empty trim piece with a firm grip keeping it...

This is a J-Channel mount for the Pixel Mounting Trim that's available from Your Pixel Store. Pair this with our Pixel Mounting Trim joiners to create window, door and home feature outlines. You can...

Pixel Paradise Snow Leopard GlideGuide – The Mega Tree Game‑Changer Stop fighting your mega tree. Start gliding it. The Pixel Paradise Snow Leopard GlideGuide by SFL Designs is built to...

This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC, EMT, and PEX. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is...

This is a pixel spacer block that will align a 12mm Bullet pixel parallel to a PVC or EMT pipe and then can be zip tied to the pipe for Christmas Lights. This was designed for 1/2", 3/4" schedule 40...

This is a 3D printed Pixel Pipe Stake. This was designed to hold the Boscoyo and HolidayCoro pixel strips. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is...

This pixel strip jig was designed to work with the standard 1mm thick pixel strip as well as the heavy duty 1.5mm pixel strip. There are four mounting holes to secure the jig to a table top. The...

This is a Pixel Strip holder that can be mounted to a PVC or EMT pipe that them holds the HolidayCoro PixNode Classic Strip and Boscoyo ORIGINAL 12mm Pixel/RGB Mounting Strips. The PVC pipe version...

This is a surface mounting bracket for a single, dual, triple or quad power supply. These are sold as a set, and will be printed with PETG. These new brackets were designed for the MEAN WELL...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm bullet pixel that can be mounted to a either 3/16" and 1/4" round bar, 1/2" & 3/4" schedule 40 PVC & EMT pipe. There is also a...

This is a PPC (Pixel Pipe Clip) spacer tool that will help you accurately space out PPCs or PBCs as they are mounted on PVC or EMT pipe. This was designed for 1/2", 3/4", 20mm and 25mm schedule 40...

This is an angled bracket used with the Puck Track Mounting system. Each bracket gives your Puck Track mounting system a professional finish. These components are printed with PETG which is UV...