Shop

  These are our seed pixel pipe matrix clips. They snap onto PVC or EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips...

  These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto PVC or EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top and...

  This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC and 1/2"...

  This is a 3D printed Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount. If you have access to a 3D printer, you can download any...

  No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the coro to the clip for an even stronger connection...

This is a 3D printed gutter clip designed to hold 1mm thick pixel strip. This was designed for the HolidayCoro PixNode Classic Strip and Boscoyo ORIGINAL 12mm Pixel/RGB Mounting Strips. These clips will latch over the edge of the gutter and hold the...

  This is a 3D printed shingle clip designed to hold 1mm thick pixel strip. This was designed for the HolidayCoro PixNode Classic Strip and Boscoyo ORIGINAL 12mm Pixel/RGB Mounting Strips. These clips will latch onto a shingle and once the pipe is...

  This is a 3D printed Pixel Pipe Stake. This was designed to hold the Boscoyo and HolidayCoro pixel strips. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is best to insert a small piece of PVC pipe into...

  This is a Pixel Strip holder that can be mounted to a PVC or EMT pipe that them holds the HolidayCoro PixNode Classic Strip and Boscoyo ORIGINAL 12mm Pixel/RGB Mounting Strips. The PVC pipe version was designed for 1/2" or 3/4" schedule 40 pipe...

This is a 3D printed vinyl siding corner bracket. This is available for the standard 1mm thick and Heavy Duty 1.5mm thick pixel strips. These can be ordered to fit 3", 3 1/3" and 4" vinyl siding corners. Custom sizes available with the design change...

This is a 3D printed pixel strip mount that secures to a downspout. There are several orientations of the mount available. This design is simple and only requires the use of a zip tie to securely attach this mount to your downspout. Only two are needed...

  This is our perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. These are printed in UV resistant PETG material and if you are concerned with heat in you area, we do offer these in ASA for an additional...