Shop

This is a 3D printed vinyl siding corner bracket. This is available for 1/2" & 3/4" schedule 40 PVC and EMT. These can be ordered to fit 3", 3 1/3" and 4" vinyl siding corners. Custom sizes available with the design change request.If you have access...

  This is a 3D printed roof peak bracket designed to hold 1/2", 3/4" schedule 40 PVC or EMT. These brackets will hook over your roof peak top cap and hold the pipe securely to the roof, even in heavy winds! If you have access to a 3D printer, you...

  This is a 3D printed shingle clip designed to hold 1/2", 3/4" PVC or EMT in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard zip tie. These clips...

This is our pipe standoff. This is available for 1/2" & 3/4" PVC and EMT pipe and in lengths of 1" up to 3" in 1/2" increments. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length.If you have...

  This is a 3D printed gutter clip designed to hold 1/2", 3/4" schedule 40 PVC, PEX or EMT. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! These new clips have a built...

  This is a 3D printed gutter clip designed to hold 1/2", 3/4" schedule 40 PVC, PEX or EMT. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! These new clips have a built...

  This is a 3D printed gutter clip designed to hold 1/2", 3/4" schedule 40 PVC, PEX or EMT. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! These new clips have a built...

  These are our seed pixel pipe matrix clips. They snap onto PVC or EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips...

  These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto PVC or EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top and...

  This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC and 1/2"...

  This is a 3D printed Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount. If you have access to a 3D printer, you can download any...

  No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the coro to the clip for an even stronger connection...