Shop

  This is a 3D printed gutter clip designed to securely hold a Pixa Bulb C7 or C9 pixel. These clips will latch over the edge of the gutter and hold the Pixa Bulb securely to the gutter, even in heavy winds! These new clips have a built in...

  This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it to another pipe to be used as a standoff. They will space the PixelPipe far enough away from the mounting pipe to clear the pixels. The pixel...

  These are our seed pixel pipe clips. They snap right onto PVC, EMT or PEX pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed...

  This is our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back side where a zip tie can be inserted in, and then a second zip zip...

  This is a 3D printed pipe clip that mounts to a surface with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip. These are available in lengths of 2", 3", 4", 5" &...

  This is a flush mount pipe clip. This is available for 1/2" & 3/4" PVC and EMT pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in length based on the pipe it...

  This is a 3D printed shingle clip designed to hold 1/2", 3/4" PVC or EMT. These clips will latch onto a shingle and once the pipe is inserted, they lock on even more for a firm, secure hold. If you have access to a 3D printer, you can download any...

  This is a 3D printed gutter clip designed to hold 1/2", 3/4" schedule 40 PVC or EMT. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! We now have three different sizes...

  This is a 3D printed pipe clip that mounts to a surface at 90* with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip. These are available in lengths of 2", 3", 4",...

  This is a 3D printed pipe clip that mounts to a surface with a 1.25" magnet that is to be screwed into the base. These are available in lengths of 1", 1.5" 2", 2.5" & 3". The length is from the center of the pipe to the base of the shaft...

  This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm bullet pixel that can be mounted to a either 3/16" and 1/4" round bar, 1/2" & 3/4" schedule 40 PVC & EMT pipe. There is also a locking pin option that will help keep the clip...

  This is a PBC (Pixa Bulb Clip) that will securely hold a Pixa Bulb C7 or C9 pixel that can then be mounted to 1/2" or 3/4" PVC or EMT pipe. There is also a locking pin option that will help keep the clip centered on the pipe. A 3mm drill bit is...