Shop

This is a 3D printed pipe clip that mounts to a surface with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip. These...

This is a flush mount pipe clip. This is available for 1/2" & 3/4" PVC and EMT pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm...

This is a 3D printed shingle clip designed to hold 1/2", 3/4" PVC or EMT. These clips will latch onto a shingle and once the pipe is inserted, they lock on even more for a firm, secure hold. If you...

This is a 3D printed gutter clip designed to hold 1/2", 3/4" schedule 40 PVC or EMT. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even...

This is a 3D printed pipe clip that mounts to a surface at 90* with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip...

This is a 3D printed pipe clip that mounts to a surface with a 1.25" magnet that is to be screwed into the base. These are available in lengths of 1", 1.5" 2", 2.5" & 3". The length is from the...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm bullet pixel that can be mounted to a either 3/16" and 1/4" round bar, 1/2" & 3/4" schedule 40 PVC & EMT pipe. There is also a locking...

This is a PBC (Pixa Bulb Clip) that will securely hold a Pixa Bulb C7 or C9 pixel that can then be mounted to 1/2" or 3/4" PVC or EMT pipe. There is also a locking pin option that will help keep the...

This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. If you have access...

This is a 3D printed clip to attach pipe to J-Channel. This is available for 1/2" & 3/4" PVC and EMT pipe. These are available in lengths of 2", 2.5" & 3" and the length is measured from the edge of...

This is a 3D printed pipe clip to hold 1/2", 3/4" schedule 40 PVC or EMTpipe that would then mount to a flat surface with two screws. If you have access to a 3D printer, you can download any of the...

This is a 3D printed pipe mount that secures to a downspout. There are several orientations of the mount available. This design is simple and only requires the use of a zip tie to securely attach...