This is a 3D printed pipe clip that mounts to a surface with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip. These are available in lengths of 2", 3", 4", 5" & 6". The length is measured from the mounting base to the center of the pipe. They are available with or without a wire channel.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
- PETG, ASA or ABS
- At least 25% infill (honeycomb or gyroid for strength)
- We used a 0.4mm nozzle with a 0.2mm layer height
- At least 1mm wall thickness
- 4 walls
- 6 Top and Bottom layers
- These can be printed without supports
- Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
Dimensions:
Diameter: Varies
Length: Varies
Thickness: 15mm
Base Width: 40mm
Mounting Hole Center to Center: 25.4mm
Downloadable STL Files:
1/2" PVC Standard Wall Mount Clip
3/4" PVC Standard Wall Mount Clip
1/2" EMT Standard Wall Mount Clip
3/4" EMT Standard Wall Mount Clip
20mm PVC Standard Wall Mount Clip
25mm PVC Standard Wall Mount Clip