STL Files

This is a shingle clip designed to hold 1/2" PVC in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard zip tie. These clips offer a secure grip in the top...

This is a PPMC (PVC Pipe Matrix Clip) that will connect to other PVC pipes to help create a pixel matrix. This version was designed for 1/2" schedule 40 pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper side to side...

This is our 1/2" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length.Try Before You...

This is our 1/2" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is 4mm in diameter with a 4mm countersunk hole. The clip is 15mm thick and varies in length.Try Before You...

This is our 1/2" PVC to 1/2" PVC perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...

These are our seed pixel pipe matrix clips. They snap onto 1/2" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 1/2" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top...

This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it to another pipe (1/2" PVC) to be used as a standoff. They will space the PixelPipe far enough away from the mounting pipe to clear the pixels. The...

This is a gutter clip designed to hold 1/2" schedule 40 PVC. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a built in anti-rotation bar on the rear and a gripping...

These are our seed pixel pipe clips. They snap right onto 1/2" Schedule 40 PVC pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed...

This is the STL file for our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back side where a zip tie can be inserted in, and then a second...

This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed for 1/2" schedule 40 PVC. There is a locking pin...