STL Files

This is our 3/4" EMT pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length.Try Before You...

These are our seed pixel pipe matrix clips. They snap onto 3/4" EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips are used...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 3/4" EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top and bottom of...

This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it to another pipe (3/4" EMT) to be used as a standoff. They will space the PixelPipe far enough away from the mounting pipe to clear the pixels. The...

This is a gutter clip designed to hold 3/4" EMT pipe. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a built in anti-rotation bar on the rear and a gripping feature...

These are our seed pixel pipe clips. They snap right onto 3/4" EMT pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed pixels on the...

This is the STL file for our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back side where a zip tie can be inserted in, and then a second...

This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed for 3/4" EMT pipe. There is a locking pin option that...

This is our 3/4" EMT to 3/4" EMT perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the coro to the clip for an even stronger connection. This STL...

This is a 3D printed pipe clip to hold 3/4" EMT pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for...

This is our controller box mount for the Budbox NBF-32022 box. These mounts make it easy to deploy your controller in many locations with the use of 1/2" or 3/4" schedule 40 PVC, EMT pipe and even a 5' Steel Fence Light Duty U-Post. The enclosure can be...