STL Files

This is a 3D printed gutter clip designed to hold 20mm schedule 40 PVC pipe. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! Three different sizes are included in the zip...

This is our 20mm PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length.Try Before You...

These are our seed pixel pipe matrix clips. They snap onto 20mm schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 20mm PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top and bottom of...

This is a gutter clip designed to hold 20mm schedule 40 PVC. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a built in anti-rotation bar on the rear and a gripping...

These are our seed pixel pipe clips. They snap right onto 20mm PVC pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed pixels on the...

This is the STL file for our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back side where a zip tie can be inserted in, and then a second...

This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed for 20mm schedule 40 PVC. There is a locking pin option...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the coro to the clip for an even stronger connection. This STL...

This is a 3D printed pipe clip to hold 20mm PVC pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. These clips provide a dependable connection point for building structural frames, stabilizing large props, and reinforcing display...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. These clips provide a dependable connection point for building structural frames, stabilizing large props, and reinforcing display...