STL Files

This is our 25mm PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...

These are our seed pixel pipe matrix clips. They snap onto 25mm schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 25mm PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire...

This is a gutter clip designed to hold 25mm schedule 40 PVC. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a...

These are our seed pixel pipe clips. They snap right onto 25mm PVC pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but...

This is the STL file for our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back...

This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...

This is a 3D printed pipe clip to hold 25mm PVC pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if this clip...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. T

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. T

This is a EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments...