STL Files

This is a SPPC (Square Pixel Pipe Clip) that will securely hold a 12mm Square pixel to a pipe for Christmas Lights. This was designed for 1/2" EMT pipe. There is a locking pin option that will help...

This is a flush mount pipe clip. This is available for 1/2" EMT pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in...

This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. Try Before You...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel perpendicular to a pipe for Christmas Lights. This was designed for 1/2" EMT pipe. There is a locking pin option that will...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel parallel to a pipe for Christmas Lights. This was designed for 1/2" EMT pipe. There is also a locking pin option that will...

This is a 3D printed gutter clip designed to hold 1/2" EMT pipe. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! Three...

This is a pipe clip that mounts to a surface with a 1.25" magnet that is to be screwed into the base. These are available in lengths of 1", 1.5" 2", 2.5" & 3". The length is from the center of the...

This is the STL files to print the roof peak brackets designed to hold 1/2" EMT pipe. These brackets will hook over your roof peak top cap and hold the pipe securely to the roof, even in heavy...

This is a shingle clip designed to hold 1/2" EMT in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard...

This is a 3D printed gutter clip designed to hold 3/4" EMT pipe. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! Three...

This is an EPMC (EMT Pipe Matrix Clip) that will connect to other EMT pipes to help create a pixel matrix. This version was designed for 1/2" & 3/4" EMT pipe. This is available for 1", 1.5", 2", 2...

This is an EPMC (EMT Pipe Matrix Clip) that will connect to other EMT pipes to help create a pixel matrix. This version was designed for 1/2" EMT pipe. This is available for 1", 1.5", 2", 2.5" and 3"...