This is a generic coro backer plate that is used to keep slitted coro flat. There are three versions of the backer plate available, Single, Dual and Triple zip tie. Each version has a zip tie center to center spacing of two (2) inches. The dual and triple versions have a two (2) inch spacing between each zip tie. The backer plates can be placed end to end and the spacing between zip ties is still two (2) inches. The is a unique ridge on the top size that helps keep tension on the zip tie for a firm hold on the coro, which helps maintain the flatness of the coro.
If you have access to a 3D printer, you can download any of the designs for free by following the links below.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
- PETG, ASA or ABS
- At least 20% infill (honeycomb or gyroid for strength)
- We used a 0.4mm nozzle with a 0.2mm layer height
- At least 1mm wall thickness
- 4 walls
- 6 Top and Bottom layers
- These can be printed without supports
- Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
Dimensions:
Single Zip Tie
Length: 2in
Width: 3in
Thickness: 10mm
Dual Zip Tie
Length: 4in
Width: 3in
Thickness: 10mm
Triple Zip Tie
Length: 6in
Width: 3in
Thickness: 10mm
Downloadable STL Files:
