Description

Our Coyote Connectors are the perfect addition to your DIY display. They are available for 1/2" & 3/4" PVC and EMT and give you the control to create any custom angle to support your props. These can be interchanged to create all kinds of angles and joints. These strong and versatile connectors give you the flexibility you have been searching for!

To connect the two joints together, simply use a 1/4"-20 bolt that is 1.5" long with a washer and lock nut. Adjust the Coyote Connector to the desired angle, and tighten up the hardware for a secure, sturdy connection.

These are printed in UV resistant PETG material and if you are concerned with heat in your area, we do offer these in ASA for an additional cost. I would recommend using PETG for most applications.

This is a creation by Langdon Designs!

A complete set must use one Part A and one Part B.

Dimensions:

Part A

1/2" EMT: Length: 29mm, Width: 29mm, Thickness: 79mm

1/2" PVC: Length: 32mm, Width: 32mm, Thickness: 79mm

3/4" EMT: Length: 34mm, Width: 34mm, Thickness: 79mm

3/4" PVC: Length: 38mm, Width: 38mm, Thickness: 79mm

Part B

1/2" EMT: Length: 57mm, Width: 29mm, Thickness: 30mm

1/2" PVC: Length: 59mm, Width: 32mm, Thickness: 30mm

3/4" EMT: Length: 62mm, Width: 34mm, Thickness: 30mm