For Permanent Mounting STL Files

This is a 3D printed pipe clip to hold 3/4" EMT pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if this clip...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...

This is a flush mount pipe clip. This is available for 3/4" PVC pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in...

This is our 3/4" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...

This is a 3D printed pipe clip to hold 3/4" schedule 40 PVC pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if...

This is our beam mount clip. This is available for 1/2" EMT pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 1/2" PEX pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 1/2" PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 20mm PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 25mm PVC pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 3/4" EMT pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...