Shop

This is a vinyl siding pixel prop hanger to hang coro props to your vinyl siding. Each clip can reliably support up to 10lbs of weight. These were designed to be somewhat universal and only require the use of a zip tie for each hanger. The two holes...

This is a vinyl siding pixel prop spacer that is used with the hangers to space the coro props away from your vinyl siding. These were designed to be somewhat universal and only require the use of a zip tie for each hanger. These are available in...

  This is a square pixel mount for 12mm bullet pixels. The mounting holes are 4mm in diameter and the thickness of the base is 8mm. The base is 30mm x 30mm square and a total of 15mm tall. If you have access to a 3D printer, you can download any of...

  This is a BPTC (Bullet Pixel Tree Clip) that will securely hold a 12mm Bullet pixel parallel to a tree base or branch for Christmas Lights. There are three sizes available that have a different radius to help hug the portion of the tree you are...

The SFL J-Channel Drilling Jig is a follow up to our popular SFL PVC Drilling Jig. This new J-Channel jig is meant to make the drilling process faster, easier and more accurate than any other designs. Unlike typical J-Channel drilling jigs, there is no...

  This is a wire cover that can be clipped into vinyl siding to conceal cables that run to lights, props or other devices. This is available in 1" increments starting at 1" and going as long as 6". The wire channel gap has a 3/8" opening and can...

This is a surface mounting bracket for a single, dual, triple or quad power supply. These are sold as a set, and will be printed with PETG. These new brackets were designed for the MEAN WELL LRS-350, MEAN WELL LRS-600, and most generic power supplies...

  This is an end cap used with the Permatrack Pixel Mounting system. Each end cap gives your Permatrack mounting system a professional finish. These end caps are printed with PETG which is UV resistant and are intended to last for many years to come...

This is a magnetic mount for Coro props. These are available in lengths of 10mm increments starting at 50mm and go up to 100mm to the base of the clip, not including the thickness of the magnet. The round base thickness is not included in that...

  This is an angled bracket used with the Permatrack Pixel Mounting system. Each bracket gives your Permatrack mounting system a professional finish. These components are printed with PETG which is UV resistant and is intended to last for many years...

  This is an middle joiner used with the Permatrack Pixel Mounting system. Each joining piece gives your Permatrack mounting system a professional finish. These joiners are printed with PETG which is UV resistant and are intended to last for many...

This pixel strip jig was designed to work with the standard 1mm thick pixel strip as well as the heavy duty 1.5mm pixel strip. There are four mounting holes to secure the jig to a table top. The holes are 4mm in diameter and work with standard wood...