Shop

  This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. If you have access to a 3D printer, you can download any of the...

  This is a 3D printed clip to attach pipe to J-Channel. This is available for 1/2" & 3/4" PVC and EMT pipe. These are available in lengths of 2", 2.5" & 3" and the length is measured from the edge of the J-Channel to the center of the pipe...

  This is a 3D printed pipe clip to hold 1/2", 3/4" schedule 40 PVC or EMTpipe that would then mount to a flat surface with two screws. If you have access to a 3D printer, you can download any of the designs for free by following the links below...

This is a 3D printed pipe mount that secures to a downspout. There are several orientations of the mount available. This design is simple and only requires the use of a zip tie to securely attach this mount to your downspout. Only two are needed for...

  This is a PPC (Pixel Pipe Clip) spacer tool that will help you accurately space out PPCs or PBCs as they are mounted on PVC or EMT pipe. This was designed for 1/2", 3/4", 20mm and 25mm schedule 40 PVC pipe as well as 1/2" and 3/4" EMT pipe. For...

  These are EMT to PVC and PVC to PVC bushing. This bushing was designed to work with the West Lake Pipe Schedule 40 fittings. Please note that the 1/2" bushing was designed to fit into a 1/2" Schedule 40 fitting and accept a 1/2" EMT pipe. The 3/4"...

  This is a pixel spacer block that will align a 12mm Bullet pixel parallel to a PVC or EMT pipe and then can be zip tied to the pipe for Christmas Lights. This was designed for 1/2", 3/4" schedule 40 PVC and EMT pipe. There are two versions...

  This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel parallel to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT pipe and 1/4" round bar. There is also a...

  This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel perpendicular to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT pipe. There is a locking pin option that...

  This is a PPMC (PVC Pipe Matrix Clip) that will connect to other PVC pipes to help create a pixel matrix. This version was designed for 1/2" & 3/4" schedule 40 pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper...

  This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC and EMT. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is best to insert a small piece of PVC pipe into the clip...

  This is a SPPC (Square Pixel Pipe Clip) that will securely hold a 12mm Square pixel to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT pipe and 1/4" round bar (coming soon). There is...