This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC, EMT, and PEX. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is best to insert a small piece of pipe into the clip and then use a rubber mallet to insert them into the ground at your desired depth. If you want to be even more cautious, you can use a small 2x4 on top of the PVC pipe inserted into the clip to help distribute the load from the rubber mallet.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
- PETG, ASA or ABS
- At least 25% infill (honeycomb or gyroid for strength)
- We used a 0.4mm nozzle with a 0.2mm layer height
- At least 1mm wall thickness
- 4 walls
- 6 Top and Bottom layers
- These can be printed without supports
- Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
Dimensions:
Diameter: Varies
Length: Varies
Thickness: 15mm
Downloadable STL Files:
