STL Files

These are our seed pixel pipe clips. They snap right onto 25mm PVC pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed pixels on the...

This is the STL file for our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back side where a zip tie can be inserted in, and then a second...

This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed for 25mm schedule 40 PVC. There is a locking pin option...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the coro to the clip for an even stronger connection. This STL...

This is a 3D printed pipe clip to hold 25mm PVC pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. These clips provide a dependable connection point for building structural frames, stabilizing large props, and reinforcing display...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. These clips provide a dependable connection point for building structural frames, stabilizing large props, and reinforcing display...

This is a EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments starting at 30mm and go up to 50mm to the center of the...

This is a vertical EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments starting at 30mm and go up to 50mm to the...

This is a vertical EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments starting at 30mm and go up to 50mm to the...

This is an EMT to PVC bushing. This bushing was designed to work with the Lasco Schedule 40 fittings. Please note that the 3/4" bushing was designed to fit into a 3/4" Schedule 40 fitting and accept a 3/4" EMT pipe.Try Before You Buy:This option is for...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. These clips provide a dependable connection point for building structural frames, stabilizing large props, and reinforcing display...