STL Files

This is the STL files to print the roof peak brackets designed to hold 3/4" schedule 40 PVC pipe. These brackets will hook over your roof peak top cap and hold the pipe securely to the roof, even in heavy winds!Try Before You Buy:This option is for...

This is a shingle clip designed to hold 3/4" PVC in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard zip tie. These clips offer a secure grip in the top...

This is a 3D printed gutter clip designed to hold 3/4" schedule 40 PVC pipe. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! Three different sizes are included in the zip...

This is an PVC to PVC bushing. This bushing was designed to work with the Lasco Schedule 40 fittings. Please note that the 3/4" bushing was designed to fit into a 3/4" Schedule 40 fitting and accept a 1/2"" Schedule 40 pipe.Try Before You Buy:This ...

This is a PPMC (PVC Pipe Matrix Clip) that will connect to other PVC pipes to help create a pixel matrix. This version was designed for 1/2" & 3/4" schedule 40 pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper side to...

This is a PPMC (PVC Pipe Matrix Clip) that will connect to other PVC pipes to help create a pixel matrix. This version was designed for 3/4" schedule 40 pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper side to side...

This is our 3/4" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length.Try Before You...

These are our seed pixel pipe matrix clips. They snap onto 3/4" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 3/4" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top...

These back braces are made to keep your 3/4" PVC dual or triple arches perfectly spaced and together. It is recommended to use 3-4 per arch set. They attach to the back of the pipe to help conceal them from your audience.Our Ultimate Arch Bases can be...

This is our 3/4" PVC to 3/4" PVC perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...

This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it to another pipe (3/4" PVC) to be used as a standoff. They will space the PixelPipe far enough away from the mounting pipe to clear the pixels. The...